Galaxy Audio’s battery powered Cricket
Polarity/Continuity Test Set makes it easy to determine whether every component in an audio system—from patch bay to console to speakers—is in or out of polarity.
The Cricket tests balanced and unbalanced cables of up to 2,000 feet in length. It will drive a "snake" (even one with transformers), and indicate which of a microphone's XLR connector pins is hot. A glance at the Cricket's red and green LED's can save hours of trouble shooting. No wonder it's an indispensable tool for sound system owners, operators and installers. The
Cricket's palm-sized send and receive units fit into a molded vinyl carrying case.
FEATURES:
• Checks continuity and polarity
• ¼" TRS and XLR in/out
• Tests speakers, mics, cables and wireless systems
• Tests mixers and signal processors for polarity inversions
• Internal speaker for testing mic polarity
• Internal mic for testing speakers
• High level output for testing miles of cable
• Battery test on Receive module saves troubleshooting time
• Protective carrying case
• Cricket Send Pulse Generator
• Pulse Waveform Polarity: Positive-going balanced line output pulse switch selectable for hi or low level balanced signal with positive pressure produced at the tip of ¼-inch jack and pin #2 of XLR jack.
• Speaker output pulse: Accepts 2 ohm (or greater) load with positive pressure produced at the tip of a ¼-inch speaker jack and positive terminal of an internal speaker.
• Cricket Receive Pulse Detector
• Internal microphone for testing speaker output.
• Polarity/Continuity Test: Female XLR pin 2,3,1 continuity; ¼-inch jacks; tip, ring continuity.
• LEDs: Green indicates positive-going pulse polarity with power switch in "ON" position and battery status with power switch in "BAT" position. Red indicates negative-going pulse polarity.
• Detection inputs: one ¼-inch, balanced; one XLR, balanced.
• Mic sensitivity; -64 dB, +/- 3dB
Visit the official Galaxy Audio website for more information on the
Galaxy Audio CPTS CRICKET POLARITY Test Set
|
