JBL EON15G2 Powered Speaker (EACH)

The flagship of the series is the JBL EON15 G2 delivering 300 watts of power to a 15" neodymium Differential Drive® LF driver. The driver boasts a dual neodymium magnet and dual voice coil motor that efficiently delivers high output from a lightweight woofer. Meanwhile the HF amplifier delivers 100 watts of power to a 1.75" titanium diaphragm compression driver with Ferro-fluid cooling.

FEATURES:
• Frequency Range (-10 dB): 39 Hz - 18 kHz
• Frequency Response (±3 dB): 42 Hz - 17 kHz
• Horizontal Coverage (-6 dB): 90° Nominal
• Vertical Coverage (-6 dB): 60° Nominal
• Rated Maximum SPL 129 dB, @ 1 m (3.3 ft)
• Dimensions (H x W x D) 686 mm x 430 mm x 444 mm (27 in x 17 in x 17.5 in.)
• Net Weight 21 kg (46 lbs.)
• LF Driver Integral frame with one 15" (380 mm) driver, dual neodymium magnet, 2" differential drive voice-coil.
• HF Driver JBL 2418H-1 1" (throat diameter) compression driver with 1.75" diameter titanium diaphragm. Ferro-fluid cooled.
• Amplifier Power LF 300 watts @ low-frequency driver impedance.
• Amplifier Power HF 100 watts @ high-frequency driver impedance.
• Input 1 Sensitivity -44 dBu to -22 dBu for rated output (Mic/Line switch in MIC position).
-12 dBu to +20 dBu for rated output (Mic/Line switch in LINE position).
• Input 2 & 3 Sensitivity -18 dBu to +20 dBu for rated output.
• Output Level +20 dBu (peak), Loop/Mix switch in MIX position.
• Connectors- Input 1- Input 2 & 3 XLR/F, balanced 1/4" Phone, balanced (TRS)
• Crossover Frequency 1.5 kHz
• Limiting Low frequency amplifier controlled by dynamic filter.
• Loop/Mix Out XLR/M, balanced EQ High • Frequency Shelving, ±15 dB @ 5 kHz Low • Frequency Shelving, ±15 dB @ 120 Hz
• AC Input 110 - 230 VAC, 50 - 60 Hz., 175 watts rating per UL, detachable IEC power cable.