The Finalizer 96K's all new set of advanced features and enhancements including 96kHz internal and external processing truly puts the world of professional mastering within reach of every studio – large or small.
Inserted between the stereo output of your mixer or workstation and your master recording media, the Finalizer 96K dramatically enhances your material, creating that "radio ready" sound – previously unattainable outside a professional mastering house.
FEATURES:
• Convert: 24bit/96kHz resolution A/D and D/A converters, Format conversion (AES/EBU, S/PDIF and Tos-link) ADAT interface (track bounce)
• Sample Rate Conversion: Enter and exit at any Sample Rate e.g. 32, 44.1, 48, 88.2 and 96kHz and make even asynchronous conversion possible
• Shape: Five band 24bit Stereo Digital Equalizer
• Enhance: Choose between Dynamic EQ, Stereo Adjust, Digital Radiance Generator™ and Spectral Stereo Image
• Normalize: Real-time Gain Maximizer
• Expand: Variable Slope multiband Expander
• Squeeze: Multiband Compressor
• Trim: Variable Ceiling multiband Limiter
• Fade: Manual or Auto Fade Tool
• Dither: Maintain the highest resolution at the digital AES/EBU and S/PDIF outputs, Tos-link and ADAT
• Balance: L/R balance in 0.1dB steps
In short, all the tools you need are provided in the Finalizer 96K and makes it essential in your studio.
When you use the Finalizer 96K you can easily enhance the Dynamics of your mix while you mix. Inserted between the Stereo output of your mixer or DAW and your DAT or CDR, it enhances the dynamics and ensures optimal Analog to Digital conversion.
TECHINCAL SPECIFICATIONS:
Digital Inputs and Outputs
• Connectors: XLR (AES/EBU), RCA Phono (S/PDIF), Optical (Tos-link, ADAT)
• Formats: AES/EBU (24 bit), S/PDIF (20 bit), EIAJ CP-340, IEC 958, EIAJ Optical (Tos-link), ADAT Lite pipe
• Output Dither: HPF/TPDF dither 8-24 bit, mono, stereo, inverted
• Word Clock Input: RCA Phono, 75 ohm, 0.6 to 10 Vpp
• Sample Rates: 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
• Processing Delay: 0.2 ms @ 48 kHz, 0.1 ms @ 96 kHz
• Frequency Response: DIO DC to 23.9 kHz ± 0.01 dB @ 48 kHz
DC to 47.9 kHz ± 0.01 dB @ 96 kHz
• Compressor: THD+N -130 dB (0.00003%) @ 10 dB Compression, 20 Hz-20 kHz
• Sample Rate Conversion: Type Asynchronous
• Dynamic Range: 130 dB
THD+N -106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS
• Input Rate Range: 31 kHz to 49 kHz
Analog Inputs:
• Connectors XLR balanced (pin 2 hot)
• Impedance: 20 Kohm
• Max.Input Level: +22 dBu (balanced)
• Sensitivity: @ 12 dB headroom: -22 dBu to +10 dBu
• A to D Conversion: 24 bit (6.144 MHz delta sigma @ 48/96 kHz)
• A to D Delay: 0.8 ms @ 48 kHz, 0.4 ms @ 96 kHz
• Dynamic Range >103 dB (unweighted, BW=22 kHz), >106 dB(A)
• THD -95 dB (0,0018 %) @ 1 kHz, -6 dBFS (FS @ +16 dBu)
• Frequency Response 10 Hz to 20 kHz: +0/-0.2 dB @ 48 kHz
10 Hz to 45 kHz: +0/-1 dB @ 96 kHz
• Crosstalk: <-60 dB, 10 Hz to 20 kHz, typical -90 dB @ 1 kHz
Analog Outputs:
• Connectors XLR balanced (pin 2 hot)
• Impedance: 100 ohm (active transformer)
• Max. Output Level +22 dBu (balanced)
• Full Scale Output Range -10 dBu to +22 dBu
• D to A Conversion 24 bit (6.144 MHz delta sigma @ 48/96 kHz)
D to A Delay 0.57 ms @ 48 kHz
0.28 ms @ 96 kHz>100
• Dynamic Range 100 dB (unweighted, BW=22KHz), >104 dB(A)
THD -82 dB (0.008 %) @ 1 kHz
-6 dBFS (FS @ +16 dBu)
Frequency Response
10 Hz to 20 kHz
+0/-0.5 dB @ 48 kHz
10 Hz to 45 kHz
+0/-3 dB @ 96 kHz
Crosstalk<-60 dB, 10 Hz to 20 kHz
typical –90 dB @ 1 kHz
EMC
Complies with EN 55103-1, EN 55103-2, Class B of FCC rules/part 15, Class B of CISPR 22
Safety
Certified to IEC 65, EN 60065, UL 1419 and CSA E65
Environment
• Operating Temperature 32° F to 122° F (0° C to 50° C)
• Storage Temperature -22° F to 167° F (-30° C to 70° C)
• Humidity Max. 90 % non-condensing
PCMCIA Interface
• Connector PC Card, 68 pin type 1 cards
• Standards PCMCIA 2.0, JEIDA 4.0
• Card Format Supports up to 2 MB SRAM
Control Interface:
• MIDI In/Out/Thru: 5 Pin DIN
• GPI, Pedal, Fader ¼" phone jack
General
Finish Anodized aluminum front, Plated and painted steel chassis
LCD:
• Dimensions 56 x 128 dot graphic LCD-display
19" x 1.75" x 8.2 (483 x 44 x 208)
• Weight 5.2 lb. (2.35 kg)
• Mains Voltage 100 to 240 VAC, 50 to 60 Hz (auto-select)
• Power Consumption <20 W
• Backup Battery Life >10 years
|
