B52 MATRIX1000V2 Powered Speaker System

The MATRIX 1000 V2 system is an extremely portable complete sound reinforcement solution consisting of two 10" two-way speakers and an active/powered 15" subwoofer. The entire system stacks and straps together into one portable mobile system for transport.

The subwoofer enclosure is equipped with a three channel amplifier and all the electronics required to run the system. The electronic circuitry was fine tuned to match the two-way speakers for the best possible sound. This system was designed for easy operation since you do not need to worry about tweaking frequencies and finessing levels. All you have to do is set up the system components, connect the XLR right and left signal cables, speaker cables and power cords and you're ready to go!

BUILT-IN 3-CHANNEL AMPLIFIER
The 15" subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the 15" subwoofer. The rear chamber houses all of the system's electronic circuitry, which includes the amplification for all three components, power supply and preamps. The 15" subwoofer has a power handling capability of 400 watts and a nominal impedance of 8 ohms.

10" TWO-WAY SPEAKERS
The two 10" two-way speakers are loaded with B-52's custom 10" speakers and a 3/4" titanium diaphragm compression driver, mounted to a 900 x 400 constant directivity horn. The speakers are designed to be pole mounted, can sit as stage monitors and have built-in (3/8" ­ 16 TPI) flying hardware for permanent installations. The front panel of both two-way speakers is concaved so as to fit perfectly onto the subwoofers front grille for easy transport. Each two-way speaker has the power handling capability of 150 watts and a nominal impedance of 4 ohms.

TRANSPORTING THE SYSTEM
To transport the system, simply set the subwoofer on its casters and place the two 10" two-way speakers onto the subwoofer's front panel facing down. Secure them with the included locking strap by fastening it to the bar handles on the side on the subwoofer cabinet. Place the included cover over the entire system and you are ready to move the system with ease.
DOES NOT INCLUDE CABLES
Requires 2 Speak-on to Speak-on to connect sub to satelite speakers.