B52 MATRIX200 3Piece Active Speaker PA System

The MATRIX-200 is the newest member of the popular B-52 MATRIX family of active systems. Compact powerful and portable the MATRIX-200 delivers clean accurate sound ideal for both stage and music playback applications. The MATRIX-200 has a true 200-watt stereo amplifier built in 5-channel mixer studio-quality digital effects phantom power and numerous patch inputs / outputs.

BUILT-IN DSP EFFECTS
• Eight built-in high quality DSP effects
* Level control to mix processed signal
with main signal
* INPUT/MASTER switch to route effects
to either Master section or to
individual channels
• Powerful routing to combine optional
outboard effects with internal DSP effects

24-BIT DIGITAL EFFECTS
The MATRIX-200 includes a 24-bit, 8-position digital effects loop, that allows you to incorporate DSP controlled and digitally generated effects into your mix. Effects offer a wide range of "environments" to choose from including:
• Chorus • Chorus/reverb • Slapback • Echo • Large room • Small room • Small hall • Large hall

MATRIX-200 REAR PANEL
Speaker Outputs: Two full-range outputs of 100 watts each. The outputs are equalized to optimize the acoustic output of the MATRIX-200 satellite speakers.
Subwoofer Output: Switchable XLR balanced output allows you to add a subwoofer to extend the low frequency output. The sub switch must be in the OFF position if a subwoofer is not used. The switch ON position reduces the low frequency output of the full range stereo outputs.
Headphone: A 1/4" TRS phone jack stereo output is included for monitoring by headphone.

XLR INPUTS WITH PHANTOM POWER
The XLR microphone inputs are designed for use with low-impedance |Z| microphones or equipment that has a mic-level balanced output (direct-out). The balanced mic inputs include a 15 Volt DC phantom power source allowing the use of condenser microphones. Dynamic microphones can also be used with these connectors as the 15 Volts DC is too low to disturb their normal operation.

MATRIX-200 REAR PANEL
Speaker Outputs: Two full-range outputs of 100 watts each. The outputs are equalized to optimize the acoustic output of the MATRIX-200 satellite speakers.
Subwoofer Output: Switchable XLR balanced output allows you to add a subwoofer to extend the low frequency output. The sub switch must be in the OFF position if a subwoofer is not used. The switch ON position reduces the low frequency output of the full range stereo outputs.
Headphone: A 1/4" TRS phone jack stereo output is included for monitoring by headphone.

STEREO POWER AMPLIFIER FEATURES
• Output stage with discrete devices,
• not integrated IC amps
• Output power of 2 x 100w RMS with high
headroom
• Comprehensive amplifier and speaker
protection
• circuitry to guard against short circuits, DC
offsets,
• over-heating, turn-on thumps, subsonic and
• supersonic frequencies.
• Built-in stereo clip limiter
• Equalization customized to enhance and
optimize
• speaker system performance.
• Output for stereo headphones on rear panel
• Very efficient cooling, utilizing a large
heatsink
• and two direct flow fans
• Power supply with low-noise torodial
transformer
• and a dual voltage (115/230Vac) selector
switch

LOUDSPEAKERS
• Dual 6.5" drivers optimized for Di'Ippolito
configuration
• (one speaker high, one low)
• 1" exit phenolic tweeter on exponential horn
to match
• acoustic response of 6.5" drivers

FIVE CHANNEL MIXER FEATURES
• Four channels with both balanced XLR mic
inputs
and unbalanced Ό" jack line level inputs
• 15Vdc phantom power on balanced XLR
inputs
• for condenser microphones
• PAN, TONE and EFFECT LEVEL controls on
• each channel
• One stereo input channel for stereo sources
• Dual input with Ό" TRS Jack and 3.5mm Jack
• to connect any 2-channel source
• Dedicated mono Ό" Jack INSTRUMENT input
• with frequency response contoured for
• acoustical instruments
• PAN/BALANCE, TONE and EFFECT controls
• Low distortion, low noise circuitry
• PLAYBACK input/output RCA connectors
with
• LEVEL control
• PATCH section to connect optional external
processors,external effects, and foot switch
• 3-band MASTER EQ section
• XLR subwoofer output and SUB switch on
rear panel to connect a powered subwoofer