From the masters of professional club mixers comes the Rodec Scratchbox. Hand crafted to the highest of standards the Scratchbox features a super smooth custom made infinium crossfader with tension adjustment lag control reverse and full curve control to taylor the fader to your exact requirements. All 3 faders are replaceable and can be replaced with analogue or digital faders. There is a effects send return loop with a wet/dry fader for adding an effects unit and a 3 position transform switch per channel which can be configured allowing you to perform lightning double speed transform scratches.
Sound and build quality are second to none as is to be expected from Rodec. This is one serious turntablist mixer!
FEATURES:
• 10 inch width - 9 units - mixing panel.
• Front panel in elegant Titanium paint.
• Aluminium anodised smooth scratchplate, no obstructions by any paint of text print on the panel.
• Front handles to carry the mixer and to avoid unwanted moving of the buttons.
• Same height as Technics SL1210-MKII turntable.
• 4 Input channels:
• 2 Phono inputs on gold plated RCA connectors.
• 4 Line inputs CH1 + CH2 + CH3/FX-return + CH4/Session/Backtape-in.
• 1 Microphone input on COMBO (XLR-JACK) connector.
• Outputs: 2 Master outputs on RCA connectors.
• Symmetrical output with XLR-connectors on master 1.
• 1 Aux/FX-send output.
• 1 Record/aux/session output on RCA connectors.
• 1 Strong head-phones output on JACK (6,35mm) and mini-JACK (3,2mm).
• Control functions channel 1 and 2:
• Channel 1-2 reverse switch.
• Phono-Line input select switch.
• Rotative level control per channel.
• Triple tone control with short faders, for very fast manipulating of the audio spectrum (+10dB/ -21dB), with 90degrees turnable buttons.
• Aux/FX-send push-button for routing the signal to external effects-units.
• Short balance fader.
• CUT-switch with very low operating force. Can be used in 3 modes, momentary-CUT, latching-CUT and double-speed-CUT. Can be placed in 8 positions.
• Easy slide 45mm fader specially designed for high speed operating.
• Channel fader reverse switch with LED indication at the front.
• Channel fader curve control with potentiometer at the front.
• Easy slide 45mm crossfader to fade between channel 1 and 2.
• Crossfader reverse switch with LED indication at the front.
• Crossfader curve control with potentiometer at the front.
• PFL ON/OFF button.
• PFL select fader, to create a mixed signal of channel 1 and 2 in the headphones.
• All volume controls on channel 1 and 2 are done by microcontroller controlled VCA. The microcontroller works with fuzzy-logic-software, with a clock frequency of 20MHz. This fuzzy-logic-software modifies itself depending on the position of the different controls and depending on the method of operating of the user of the mixing panel.
• The channel faders, crossfader and CUT-switches can easily be replaced via frontpanel after lifting of the scratchplate.
• Control functions channel 3:
• Mic-Line input select switch.
• Rotative level control.
• 0dB LED to adjust the level.
• Dual band equalizer with rotative potmeters.
• PFL ON/OFF button.
• Routing switch to route the signal to channel 1 or 2 or directly to the mix.
• Short channel fader for fast operation.
• Channel 4:
• Rotative level control.
• Soft touch rotative knobs for better grip on all rotative potmeters.
• Mode switch to select mono or stereo operation of the mixing panel, ideal for working with records with different left and right tracks. • Two master outputs with rotative volume control (also useable as monitor or booth output).
• Two bright VU-meters to show the levels of the inputs or the mixed signal.
• Normal and upside down text print at the back panel to facilitate connection.
• Soft rubber anti-slide buttons at the bottom of the mixer.
• Power switch on the back of the panel, to avoid accidentally switching off the panel.
• External power supply, to reduce disturbances.
Visit the official Rodec website for more information on the
Rodec SCRATCHBOX Professional Battle DJ Mixer
|
