Alto Professional EMPIRE RMX1008DFX Powered Cabinet Mixer w/ Effects

This Item Has Been Discontinued
Or Is No Longer Available.

This information only remains here as a reference
for those who need information on this product.

Planet DJ is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

alto rmx1008dfx
alto rmx1008dfx Alto Professional EMPIRE RMX1008DFX Powered Cabinet Mixer w/ Effects
The RMX1008DFX includes everything you need to tackle virtually any live performance. It all starts with an ultra-clean 1000 watts of Class D power to drive your speakers of choice. Class D amplification makes the RMX1008DFX not only powerful but incredibly light compared to other solutions so you won't break your back bringing it to the venue. Running the RMX1008DFX in stereo will deliver a continuous 2 x 500W at 4-ohms of pure, clean power.

We didn't stop at just delivering clean power for this powerhouse cabinet mixer. The RMX1008DFX also features an incredibly useful array of tools that can make your events world-class. RMX1008DFX includes 18 total inputs including 8 XLR jacks with phantom power, 8 Line jacks and stereo RCA. This means that whether you're plugging in guitars, mics, keyboards or even an iPod for playback between sets, you're covered with the RMX1008DFX .

Once everything is connected, there's a full on-board digital effects processor and 3-shelf EQ on each mono and stereo channel so you can dial in the perfect sound at any venue. A 24-bit, built-in Alesis DSP effects engine supplies ample options for sweetening including Hall, Room, Vocal & Plate reverbs, Mono & Stereo delay (max delay time 650ms), Chorus, Flanger & Reverb modulations, Reverb+Delay, Reverb+Chorus and Reverb+Flanger combinations. 256 different Alesis DSP presets provide ample options for any situation. When the gig is done, inset, molded handles on both ends make it super easy to transport.

Make the professional choice for a portable cabinet mixer with the EMPIRE RMX-series.

Mono input channels
Microphone input: Electronically balanced, discrete input configuration
Frequency response: 10Hz to 55kHz, +/-3dB
Distortion: (THD & N) 0.006% at +4dBu, 1kHz
Gain: 50dB (MIC)
SNR: (Signal to Noise Ratio) >90dB

Line input
Electronically balanced
Frequency response: 10Hz to 55kHz, +/-3dB
Distortion: (THD & N) 0.04% at +4dBu, 1kHz
Gain: 30dB

Stereo input channels
Line input: Unbalanced
Frequency response: 10Hz to 55kHz, +/-3dB
Distortion: (THD & N) 0.006% at +4dBu, 1kHz

Microphone input: 1.4kOhm
Channel Insert return: 2.5kOhm
All other inputs: 10kOhm or greater
Tape out: 1kOhm
All other output: 120Ohm

Hi shelving: +/-15dB @12kHz
Mid bell: +/-15dB @2.5kHz
Low shelving: +/-15dB @ 80Hz

Alesis DSP Section
A/D and D/A converters: 24-bit
DSP resolution: 24-bit

Type of effects
Hall, Room, Vocal & Plate Reverb
Mono & Stereo DELAY (max delay time 650ms)
Chorus, Flanger & Reverb Modulations
Reverb+Delay, Reverb+Chorus,
Reverb+Flanger combinations
Presets: 256

16-position PRESET Selector; 16-position VARIATION selector
CLIP LED; MUTE SWITCH with LED indicator

Main Mix Section
Noise: (Bus Noise) Fader 0 dB, channels muted:-85dBr (ref.:+4dBu)
Fader: 0dB, all input channels assigned and set to
UNITY gain:-71dBr (ref.:+4dBu)
Max output: +27dBu balanced, +22dBu unbalanced, 1/4" jacks
AUX Sends max out: +22dBu

Output Power Stereo mode
440W(RMS) @ 4ohm
480W(EIAJ) @ 4ohm
254W(RMS) @ 8ohm
263W(EIAJ) @ 8ohm
Bridge mode 945W @ 8ohm
Power supply Main voltage 100-120VAC 60Hz
220-240VAC 50Hz
Fuse 100120V: T8A 250V
220240V:T5A 250V
Dimensions (WxLxH): 550mm x 220mm x 210mm

Additional Information

ManufacturerAlto Professional
Product ConditionNew - On Clearance

Write Your Own Review

You're reviewing: Alto Professional EMPIRE RMX1008DFX Powered Cabinet Mixer w/ Effects

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars