ADJ EVENT BAR Q4 (Store Display)

The Event Bar Q4 is a versatile fixture that may be used to spot tables, dcor and retail environments, or used as a special effect light at night clubs or other parties.

The Event Bar Q4's base has built-in DMX-512 In/Out, IEC power In/Out connectors, a 4-Button DMX LED display, built-in microphone for sound activation and -inch input for ADJ easy-to-use UC3 controller (sold separately).



Specifications:
• Four Head X-Y Bar Pinspot system with 4x 10W CREE Quad Color RGBW (4-IN-1) LEDs
• Each Pinspot's colors and movements may be individual controlled via DMX
• 3 DMX Channel Modes: 12, 14 or 25 channels
• 4 operational modes: Auto (Show Run), Sound Active, RGBW Dimmer and DMX-512 Mode
• Flicker Free
• 4-Button DMX LCD Display
• 12 Built-in Shows
• Electronic Dimming: 0 - 100%
• Full Dimming /Strobing on each Pinspot head
• Beam angle: 5-degree
• Linkable: DMX via 3-pin XLR cable; Power via IEC daisy-chain power link (Up to 6 Event Bar Q4's @ 120V, up to 10 Event Bar Q4's @ 230V)
• Compatible with American DJ UC3 Series easy-to-use controllers (sold Separately)
• Long Life LEDs (Rated at approximately 50,000 hrs.)
• Light Source: 4 x 10W Quad (RGBW: 4-IN-1) LED
• Omega bracket included so the bar may be attached to a clamp for truss mounting
• Built-in mount for a lighting stand (stand sold separately)
• Safety loop on rear
• Power Consumption: 56W
• Multi-voltage Operation: AC 100 - 240V, 50/60Hz
• Dimensions (LxWxH): 41" x 4.25" x 10.75" / 1040 x 103 x 270mm
• Weight: 29 lbs. / 13 kg.

California Prop 65 - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov