The ADJ Fog Fury 3000 is a 1500W professional DMX Fog Machine with new advances in technology. It has a special heating element design that uses an oil type transmission throughout the pipeline to prevent clogging. It is also equipped with a high performance pump system for optimum output. ADJ's Electronic Thermo Sensing (ETS) technology is on-board to maintain optimum heat levels with no warm-up time between fog blasts.
The Fog Fury 3000 also has convenient features such as a LED heating indicator system that changes colors depending on whether the fogger is heating up, ready to use, or if the fog fluid is low. It also has built-in DMX control with a 3-button digital LCD display on the rear panel with 3 operational modes: Manual, DMX or built-in Timer Remote.
This fogger produces 21000 cubic feet of fog per minute, has an external tank with a 5 Liter capacity, and has an 8 minute warm-up time. This machine uses water-based fog fluid only.
- 1500W professional DMX Fog Machine
- High performance pump for optimum output
- ADJ's Electronic Thermo Sensing (ETS) technology to always maintain optimum heat levels with no warm-up times between fog blasts
- Automatic circuit cut-off to protect pump if fog fluid tank runs dry
- Special heating element design that uses an oil type transmission pipeline system to minimize the possibility clogging
- LED heating indicator system in tank: Red = Heating; Green = Ready to use; Flashing = Fog fluid tank is low
- 3 Operational modes: Manual, Timer Mode, or DMX Controlled
- 3 DMX Channels
- 3-button DMX LCD display on rear panel
- 3-pin DMX XLR In/Out connections
- Heater: 1500W
- Fog Output: 21000 (cu.ft/min)
- Warm-up time: 8 min.
- External fog fluid tank: 5 Liter
- Single yoke to mount on a wall or from trussing bracket
- Convenient carrying handle
- Power Consumption: 1600W max
- Power: AC 120V/60Hz or 230V/50Hz (non switching)
- Dimensions (LxWxH): 475 x 345 x 321mm
- Weight: 11.28 kg
- Only use high quality, water-based fog fluid
ADJ FOG FURY 3000 DMX Fog Machine Reviews