The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method.
Main Features:
1. Intelligent Wireless Control System
Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area.
2. Opto-electronic Fluid Sensor
When the fluid recipient runs dry, the fluid sensor stops pumping automatically to protect pump from burning.
3. More Efficient New Heat Exchanger Design
It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others.
4. New Advanced PCB (Printed Circuit Board)
Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between - 20 and + 60 degree Celsius.
The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method.
Main Features:
1. Intelligent Wireless Control System
Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area.
2. Opto-electronic Fluid Sensor
When the fluid recipient runs dry, the fluid sensor stops pumping automatically to protect pump from burning.
3. More Efficient New Heat Exchanger Design
It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others.
4. New Advanced PCB (Printed Circuit Board)
Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between - 20 and + 60 degree Celsius.
Specification
Power : AC100V/AC120V/AC230V/AC240V,50Hz-60Hz
Heater : 1,500 W
Output : 20,000 cu.ft / min
First Heat-up Time : 10 min
Tank Capacity : 6 liter
Fluid Consumption Rate : 8.3 min / liter (100% Output)
Remote Included : W-1 Wireless Remote
Optional Accessories : FW-500 Flight Case , W-515-HB Hanging Bracket
Weight : 14 Kg Dimensions (mm) : L 561 W 278 H 186
Wireless DMX is optional for both W-515 & W-530
Liquid Used : Antari FLR / FLG Liquid
California Prop 65 -
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov