This mic is designed to reduce pick up sounds from the sides and the rears improving your sound source.
FEATURES:Outstanding performance and versatility
High max SPL and wide dynamic range
Low self-noise (16 dB SPL) - perfectly suited for today's most sophisticated digital recording equipment
Flat, extended frequency response
Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad
SPECIFICATIONS:• Element: Condenser
• Pattern: Cardioid
• Frequency Response: 30 - 20,000 Hz
• Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
• Impedance: 250 ohms
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.
• Signal to Noise Ratio: 78 dB, 1 kHz at 1 Pa
• Dynamic Range (Typical): 132 dB, 1 kHz at Max. SPL
• Phantom Power Requirements: 11 - 52V, 3 mA typical
• Switches: 10 dB pad; roll-off
• Low Frequency Roll-off: 80 Hz, 12 dB per octave
• Weight: 4.1 oz (116 g)
• Output Connector: Integral 3-pin XLRM-type
• Accessories Furnished: AT8405 stand clamp; • foam windscreen; protective pouch
California Prop 65 -
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov