This microphone has an integral filter designed to reduce the pick up of low frequency noise such as traffic or air handling systems.
Outstanding performance and versatility
High max SPL and wide dynamic range
Low self-noise (16 dB SPL) - perfectly suited for today's most sophisticated digital recording equipment Flat, extended frequency response
Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad .
SPECIFICATIONS:• Element: Condenser
• Pattern: Omnidirectional
• Frequency Response: 30 - 20,000 Hz
• Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
• Impedance: 250 ohms
• Maximum Input Sound Level: 148 dB SPL, 1 kHz at 1% T.H.D.
• Signal to Noise Ratio: 78 dB, 1 kHz at 1 Pa
• Dynamic Range (Typical): 132 dB, 1 kHz at Max. SPL
• Phantom Power Requirements: 11 - 52V, 3 mA typical
• Switches: 10 dB pad; roll-off
• Low Frequency Roll-off: 80 Hz, 12 dB per octave
• Weight: 4.0 oz (112 g)
• Output Connector: Integral 3-pin XLRM-type
• Accessories Furnished: AT8405 stand clamp; foam windscreen; protective pouch
California Prop 65 -
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov