These mics are especially useful in noisy or reverberant environments because of their ability to accurately home in on a particular sound while rejecting surrounding sounds.
FEATURES:• Designed for broadcasters, videographers and sound recordists
• Compact, lightweight design is perfect for camera-mount use
• Independent Line-cardioid and Figure-of-eight condenser elements
• Switchable low-frequency roll-off
• Switch selection of non-matrixed M-S mode and two internally-matrixed left/right stereo modes
• Includes a 24" (0.61 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors)
SPECIFICATIONS:• Transducer Fixed-Charged Back Plate Permanently Polarized Condenser
• Polar Pattern Line-Cardioid and Figure-of-Eight
• Frequency Response 40 Hz - 20 kHz
• Dynamic Range (Typical) Mid: 101 dB
Side: 101 dB
• LR Stereo: 102 dB, (All @ 1 kHz at Maximum SPL)
• Signal-to-Noise Ratio Mid: 72 dB, (1 kHz at 1 Pa)
Side: 68 dB, (1 kHz at 1 Pa)
LR Stereo: 70 dB, (1 kHz at 1 Pa)
• Maximum Input Sound Level Mid: 123 dB, (1 kHz at 1% T.H.D.)
Side: 127 dB, (1 kHz at 1% T.H.D.)
LR Stereo: 126 dB, (1 kHz at 1% T.H.D.)
• Power Requirements Phantom Power, (9 - 52v DC)
• Output Impedance 200 Ohms
• Output Connectors XLR-5M Type (from Microphone)
2 XLR-3M Connectors (L+R) from Microphone's Adapter Cable
• Pad None
• Low Frequency Roll-Off Yes, (-12 dB/Octave @ 80 Hz)
• Applications Video, Film and Broadcast Production
• Dimensions 9.29 x 0.83" (236 x 21mm) LxDiameter
• Weight 3.6 oz. (103 g)
California Prop 65 -
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov