With such innovations as a universal tracking switch-mode power supply and a fully integrated suite of speaker processing tools, these amps are at the top of their class when it comes to thermal efficiency and system flexibility. You also have greatly improved control capabilities. The addition of Peakx Plus' Limiters gives you full command over threshold, attack and release, and we enhanced the Subharmonic Synth so you can easily manage frequency, gain and filter type, allowing for application-specific tuning.
Plus, you'll now be able to tailor fan speed for specific applications and have software visibility of the power supply temperature and AC line voltage. Combine all of that with integrated cast-aluminum rack handles for maximum durability and portability and you have the power to move you - and the world.
Integrated Processing• Input EQ: 6 parametric filters per channel with adjustable Q, 15 dB boost/cut. Also adjustable high and low shelving filters. This 8-filter EQ section can be bypassed
• Crossover filters: Highpass and Lowpass per channel. Butterworth 6/12/18/24 dB per octave. Linkwitz-Riley 24/48 dB per Octave. Also includes 15 dB bandpass gain and polarity control
• Output EQ: 8 parametric filters per channel with adjustable Q, 15 dB boost/cut. This 8-filter EQ section can be bypassed
• Delay: For signal alignment of driver; 50 mS of total delay
• SubHarmonic synth: Takes the low-frequency content of the input signal and "synthesizes" a new signal that is the same as the input signal but one octave lower. The new synthesized signal is then mixed with the original signal to create the effect. New: Users now have control over frequency, gain, and filter type
• Peakx' plus limiter: User defeatable limiter that allows users to control Threshold, Attack, and Release times
• Presets: 30 total presets, 29 of which are user-definable
Controls• Level: Two front-panel rotary level controls, one for each channel
• Power switch: On/Off switch applies AC power to the amplifier
• Sel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout
• LCD Screen: Backlit liquid crystal display that shows preset and processing status
Input/Output Connectors• Input connectors: XLR, one per channel
• Link/Out connector: Loop-thru signal from input connector for linking another amplifier, one per channel
• Output connectors: Two Neutrik Speakon NL4MP output connectors, Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable, Two binding post outputs (in parallel with Speakon connectors)
• HiQnet' USB connector: Type B, connects to HiQnet' network
Construction• Chassis: Steel
• Front panel: Cast-aluminum
• Cooling: Proportional speed fan with front-to-rear airflow
Specifications:• Power output: 700 watts 2 ohm stereo per ch, 500 watts 4 ohm stereo per ch, 275 watts 8 ohm stereo per ch, 1,000 watts 8 ohm bridge-mono, 1,400 watts 4 ohms bridge-mono
• Sensitivity (for full rated power at 4 ohms): 1.4V RMS
• Frequency response (at 1 watt, 20 Hz - 20 kHz): +0 dB, -1 dB
• S/N Ratio (below rated 1 kHz power at 8 ohms): 100 dB (A weighted)
• T.H.D.: <0.5%
• Damping factor (20 Hz to 1 kHz):> 500
• Crosstalk (below rated power): 20 kHz - 1 kHz: >70 dB
• Input impedance (nominal): 20k ohms balanced, 10k ohms unbalanced
• Maximum input signal: +22 dBu typical
• AC Line voltage and frequency configurations: 120 VAC 60 Hz
• AC Line current (120 VAC amplifier playing 1/8 power pink noise into 4 ohms per ch): 6.8A; no more than 38 watts at idle
• Operating temperature: 0C to 40C at 95% relative humidity (non-condensing)
• Dimensions: 19" W x 3.5" H x 12.25" D
• Net weight: 18.5 lbs. (8.4 kg)
California Prop 65 -
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov