for Instant VIP Discounts on most gear! (Better Than Codes, and it's Free)

DBX 2215 Dual 15-Band Graphic Equalizer

dbx 2215
dbx 2215 DBX 2215 Dual 15-Band Graphic Equalizer
Images may show accessories or configurations not packaged with this item.

Be the first to review this product

Unavailable This item has been discontinued or is no longer available.
In Stock It may be available on Amazon
In Stock Free shipping on most orders over $35
Buy on Amazon
It's amazing. One little button. So much effect. dbx Type III Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box.

DBX 2215 FEATURES INCLUDE:


* Revolutionary instant encode/decode Type III Noise Reduction in-circuit at the push of a button. Increases S/N ratio by up to 20dB
* Patent-pending PeakPlus Limiter threshold range from 0dBu to +24dBu (off) can transparently tame the wildest hits or the subtlest nuances of any signal
* An extremely high quality EQ, patent-pending Type III Noise Reduciton, and the elegant new PeakPlus Limiter all in one great sounding box
* Four segment LED bargraph for BOTH Gain Reduction AND Output Level offers the most comprehensive visual feedback available
* Status LEDs offer visual feedback for all settings on the front panel

DBX 2215 Specs

• Input Connectors: 1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip
• Input Type: Electronically balanced/unbalanced, RF filtered
• Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm
• Max Input: >+21dBu balanced or unbalanced
• CMRR: >40dB, typically >55dB at 1kHz
• Output Connectors: 1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip
• Output Type: Impedance-balanced/unbalanced, RF filtered
• Output Impedance: Balanced 200 ohm, unbalanced 100 ohm
• Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
• Bandwidth: 20Hz to 20kHz, +/-0.5dB
• Frequency Response: <10Hz to >50kHz, +0.5/-3dB
• Signal-to-Noise (NR In: +/-6 and +/-15dB ranges): >102dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
• Dynamic Range (NR In: +/-6dB and +/-15dB ranges): >120dB, unweighted
• Signal-to-Noise (NR Out: +/-6dB range): >94dB, unweighted, ref: +4dBu, 22kHz measurment bandwidth
• Dynamic Range (NR Out: +/-6dB range): >112dB, unweighted
• Signal-to-Noise (NR Out: +/-15dB range): >90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
• Dynamic Range (NR Out: +/-15dB range): >108dB, unweighted
• THD+Noise: <0.04%, 0.02% typical at +4dBu, 1kHz
• Interchannel Crosstalk: <-80dB, 20Hz to 20kHz
• Noise Reduction: Up to 20dB of dynamic broadband noise reduction
• NR Switch: Activates dbx Type III Noise Reduction
• Bypass Switch: Bypasses the graphic equalizer section in the signal path
• Low cut Switch: (recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter
• Range Switch: (recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range
• I/O Meter: 4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu
• Gain Reduction Meter: 4-LED bar graph (all Red) at 0, 3, 6, and 10dB
• Indicators: NR Active (Yellow); EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)
• Operating Voltage: 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz
• Power Consumption: 28W
• Power Connector: IEC receptacle
• Dimensions: 3.5" H X 19" W X 7.9" D (8.9cm x 48.3cm x 20.1cm)
• Unit Weight: 8.5 lbs. (3.9 kg)
• Shipping Weight: 9.5 lbs. (4.3 kg)

With the 2215 from dbx Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction.

Additional Information

UPC691991400094
SKU2215
ManufacturerDBX
Price$429.95
Product ConditionNew - On Clearance

DBX 2215 Dual 15-Band Graphic Equalizer Reviews

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Quality