Elation FLEXRGB 10' RGB Flex Tape Roll

FLEX RGB WP tape
The RGB version has been prefabricated in a 10' spool with 60 x 2" circuit strips holding 3 SMD LED'S each for a total of 180 120 SMD LED's. You will need a 12V power supply and a control option to make the tapes work. The Power supplies offered are UL and CSA approved or recognized.

There are two control options available to operate the FLEX RGB tape.
• Option 1 - An infrared wireless controller system to change colors which allows you to select 16 static colors or run color fades plus 2 intensity settings.
• Option 2 - A DMX driver that will give you 3 DMX channels and allow you to use the DMX controller of your choice. This will allow you to create specific colors, 0-100% dimming and program intensity levels of your choice. Needed items Elar Driver 1 and S-150-12.

Specifications

FLEX RGB TAPE ORDERING DETAILS
• FLEX RGB+WP: 10' RGB Flex tape roll v+ constant current design
• FLEX EC20: CM 20cm extension (8.5")
• FLEX EC3M: 1 meter extension (3'3")
• FLEX RGBC: Control Box
• WR LED: Wireless Remote
• FLEX RGBA: Amplifier

POWER SUPPLIES
• FLEX PSU4A (DC-12V 4AMP 48w)
• 1 X FLEX RBG tape

• S-150-12 (DC-12V 12.5AMP 150w)
• 3 X FLEX RBG tape
(Connections must be Parallel - you cannot link tapes together - home run to each tape)

• Elar-Driver 1 - DMX driver/dimmer - can run 1 flex RGB LED strip per PSU required
• Elar-Driver 8 12V - DMX driver/dimmer - can run 3 Flex RGB LED strip total

ACCESSORIES:
• FLEX CLIP KIT - 20 mounting clips for WP flex tape
• FLEX CLIP IP KIT - end caps connectors and silicone glue with clips

OTHER SPECIFICATIONS
• Avg. Rated Life 30,000hrs
• LED Spacing 16.6mm (.65")
• Dimensions 11.5mm (.45") W x .15mm (.005") D
• Operating Temperature - -40c to 80c
• Tape adhesive temperatures - -30c to 90c
• Total power consumption of the FLEX RGB tape is 26 watts at full power for 10' roll

California Prop 65 - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov