Martin RUSH MH3 Beam Moving Head

Not In Stock Not In Stock, But We'll Order It In For You
This item is not in stock, but can usually be back in our warehouse within 4 to 10 days, depending upon stock levels at Martin Professional's warehouse. This time frame is not guaranteed, rather an estimate based on historical data. Order now! We'll notify you promptly if we hear of any delay.
Free Shipping FREE Ground Shipping to the contiguous U.S. (details)
Affirm Financing
Future Pay
    • Buy Now and Earn 4990 PDJ Bucks ($49.90)! Applies only to registered, domestic U.S. customers. Exact value may vary once logged in.
The RUSH MH 3 Beam is a powerful beam moving head that blasts an intense and narrow long-throw beam for spectacular mid-air looks and effects. It houses a fixed gobo wheel and color wheel with a multitude of effects possible from a dimmer, strobe effect, 8-facet prism and focus.

• Powerful beam moving head
• Sharp, narrow long-throw beam
• Mid-air effects
• Fixed gobo wheel
• Color wheel
• Mechanical dimming and strobe
• Frost effect
• 8-facet prism
• Motorized focus
• 3 & 5 pin XLR

Martin Rush MH3 Beam Specs

-Dynamic Effects
• Color wheel:14 colors plus open, rotation with variable direction and speed
• Static gobo wheel:17 gobos plus open, wheel rotation and shake
• Pre-programmed effects:31 pan and tilt macros, adjustable speed
• Shutter:Strobe effect, pulse effects, instant open and blackout
• Prism:8-facet, indexing and rotation with variable direction and speed
• Frost:Fade in/out
• Zoom:Motorized
• Focus:Motorized
• Dimmer:0 - 100%, four dimming curve options
• Pan:540
• Tilt:270
• Pan and tilt speed:Adjustable via onboard control panel and DMX

• Minimum distance to illuminated surfaces:12 m
• Mounting points:Two quarter-turn brackets for rigging clamps
• Location:Indoor use only, must be fastened to surface or structure
• Orientation:Any

-Control and Programming
• Control:DMX
• DMX channels:19
• Setting and addressing:Control panel with LCD display
• DMX compliance:USITT DMX512/1990

• Approved lamp:Philips MSD Platinum 5R
• Color temperature:8000 K
• CRI (Color rendering index):75
• Average lifetime:2000 hours

• Beam angle:1 - 3.8

• Color:Black
• Housing:High-impact flame-retardant thermoplastic
• Protection rating:IP20

• AC power input:Neutrik PowerCon
• DMX data in/out:3-pin and 5-pin locking XLR

• AC power:100-240 V nominal, 50/60 Hz
• Typical total power consumption:350 W
• Power consumption figures are typical, not maximum. Allow for +/-10% variation.

-Typical Power and Current
• 110 V, 60 Hz:3.1 A, 348 W, PF 0.990
• 230 V, 50 Hz:1.6 A, 330 W, PF.0.917
• Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

• Cooling:Forced air (temperature-regulated, low noise)
• Maximum ambient temperature (Ta max.):40 C
• Minimum ambient temperature (Ta min.):0 C
• Total heat dissipation (calculated, +/- 10%):1200 BTU/hr.

Additional Information

ManufacturerMartin Professional
Product ConditionNew

Write Your Own Review

You're reviewing: Martin RUSH MH3 Beam Moving Head

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars