And so is the sound. The audio quality is everything you would expect from the people behind ReCycle and ReBirth. But pristine sound quality is only half the story; the instruments and effects in Reason are loaded with character and attitude. Reason will not just impress, but inspire you.
Each unit in Reason's virtual rack is edited from its own on-screen front panel. All the sliders, knobs, buttons and functions are right in front of you, ready to be tweaked, turned and twisted in absolute real-time. And all your front panel actions - filter adjustments, pitch bending, gain riding or panning - can be recorded and automated in the Reason sequencer.
NEW SOFTWARE 3.0 INCLUDES:
It's not an effect unit. It's not a synth. It sure isn't a sampler. It's... all of it. And more. The all new Combinator is a sophisticated device that allows you to build elaborate chains of Reason units - instruments, effects, pattern sequencers, you name it - and save as Combi patches.
The Combinator can house an unlimited number of Reason devices, which can all be combined, controlled and manipulated in ways limited only by your imagination. The Combinator's programmer window makes it a breeze to build ultra-thick, layered sounds using any number of synths and samplers, or create keyboard splits for mapping out different instruments across your MIDI keyboard. You can even alternate between instruments using velocity splits - play softly to trigger an NN-XT double bass, play harder and a Subtractor synth bass will take over.
• The Controls
The Combinator's skinnable front panel holds four rotary controls and four buttons that can all be assigned to any function on any device in your combinator chain. True to the Reason tradition, this machine is very tweakable: try using rotary 1 to control the cutoff frequency on eight separate samplers simultaneously, and rotary 2 for simultaneous tweaking of multiple knobs on your favorite synth. While you're at it, use the assignable buttons for changing patterns in ReDrum or Matrix, or for muting mixer channels, or for switching effects on or off.
• The Combi Ins
The back of the Combinator reveals two crucial connectors: the Combi input jacks. If you're into extreme signal processing, these are for you; the combi ins allow you to use your Combinator as one humongous effect unit. Feed your sounds through endless chains of reverbs, delays, filters, modulators, distortion units... you get the idea. The Reason sound bank contains a good selection of freaky but useful effect patches to get you started.
• Roll your own
The Combinator is not an instrument in itself, but make use of its extraordinary combination and routing features and you'll soon be building your own unique instruments. It's pretty safe to say that once you get familiar with the Combinator, which will take you about a minute, it will completely change the way you work in Reason.
MCLass Mastering Suite:
Want big, tight, loud sounding tracks? Need extra stereo width, increased clarity, punchier bass? Say hello to MClass, the new mastering suite in Reason 3.0. MClass brings you four separate pro level mastering units designed to add power, presence and an overall professional feel to your Reason mixes.
The MClass Equalizer
The MClass Equalizer is a 4-band, professional level mastering EQ with low and high shelving bands, two peak filters and a low cut switch. The MClass Equalizer lets you make subtle or drastic frequency adjustments to your Reason mixes, and make them sound a touch more final: clean up that muddy bottom end, add shimmer to your cymbals, bring out the vocals. With its transparent sound and precise sound sculpting features, the MClass Equalizer is a tool you can trust.
• The MClass Stereo Imager
No mastering suite is complete without a tool for controlling the stereo image. The MClass Stereo Imager splits the incoming audio into low and high frequency bands, and lets you adjust each independently. Increasing the width for the high band while making the low band slightly more mono gives you wide, open sounding mixes with a tight low end. The Stereo Imager is best suited for treating whole mixes, but feel free to use it on individual sounds and see where it takes you.
• The MClass Compressor
All mixes will benefit from a touch of mastering compression and the MClass Compressor will do just the trick. Designed to add punch and definition to your Reason tracks, this single-band compressor sounds simply amazing. The MClass Compressor features a sidechain input for advanced compression tricks such as ducking or de-essing, a soft-knee mode for smooth, musical compression and CV out for dynamically controlling other Reason devices.
• The MClass Maximizer
Every decibel counts! The MClass Maximizer is an advanced tool designed to maximize the volume of your Reason tracks, without crushing them or introducing other unwanted artifacts. The Maximizer features a Limiter section - with switchable look-ahead, for distortion- free brickwall limiting - and a Soft Clip section which gently rounds off the edges. Set your input gain and adjust the attack, release and clip amount settings for a loud, proud sound.
Line Mixer 6:2
Line Mixer 6:2 is a simple but effective 6-channel stereo line mixer. Built primarily for use in the Combinator, the Line Mixer 6:2 handles basic mixing and panning of Combi devices, but can of course be inserted anywhere in Reason: use it for submixing large drum kits, or to add extra mixer channels when Reason's main mixer is starting to fill up. Each of the six channels feature level and pan controls, mute and solo buttons plus an AUX send level control. Need more sends? Extra channels? Just create another Line Mixer.
With the Reason 3.0 browser, the task of finding and loading sounds and patches becomes just as smooth and intuitive as the process of making good music in Reason.
Reason's sound palette is getting bigger, better, wider and wilder. The new sound bank in Reason 3.0 adds huge quantities of instruments, sounds and patches to Reason's already massive library. Focusing on carefully sampled musical instruments and useful Combinator setups rather than loops and beats, the new soundbank takes a more playable, more performance- friendly direction. Load up any of the multisampled guitars, bass guitars, flutes, mellotrons, strings or melodicas and play away. Or try the mass of patches developed for Reason's new Combinator: load up complete instruments running through chains of effects in one single click, or get into some heavy-duty post-processing with the Combi FX patches. And then there's the pattern based patches, the weirded out Glitch category, the chromatic percussion section, a brass section... we could go on and on here.
Here's what you need to be able to run Reason 3.0
Intel Pentium III 300 MHz or better
256 MB RAM
2 GB free hard disk space
Windows XP/2000 or later
256 color monitor / 800x600 pixels resolution or better
16-bit windows compatible audio card, preferably with DirectX or ASIO drivers
MIDI Interface and MIDI keyboard recommended
OS G3, G4 or G5 proc
|Product Condition||New - On Clearance|