• TeleLock Lift-assist Stand
• LTV-24B Vertical Extension
• LTB-48B T-style Lighting Crossbar
• LTB-24B Lighting Sidebars
• Over-sized Heavy Wall Aluminum Tubing
• Leveling Leg - Included!
• Bag-99D Tote bag - Included!
TeleLock Lift-assist Stand
The LT-99BL is one of the easiest lighting tree stands to use thanks to its patented TeleLock collar. Set the TeleLock collar to either the "Raise" or "Lower" setting and the Auto-lock technology provides just the right amount of resistance to allow you to raise or lower the lighting tree while locking the tube in place as you go. And, the fail-safe internal friction device won't allow your lighting gear to slide down once it's in the "Lock" position. It's like having tour support built into your lighting tree stand!
Patented Die-Cast Metal Collar
The strongest leg fitting made, the collar on the TS-99BL's tripod leg fitting prevents the over-tightening and breakage issues associated with all plastic designs. It also features a Quick Release design that allows faster setup, with the same force being applied every time (similar to the same type of design used in most high-end bicycle seat posts). Plus, our die-cast fitting is 30x stronger than the ABS or Nylon plastic used by the competition.
Leveling Leg - Included!
Have you ever run into a situation when you wished you could place a speaker where a set of stairs, risers, or a short ledge was in the way? The TS-99BL includes one leveling leg that telescopes down an additional 13" beyond the length of the other two tripod legs - allowing you to place the TS-99BL on a set of stairs, risers, or hillside, etc.
LTV-24B Vertical Extension
The LTV-24B is a 24-inch vertical extension tube that fits on top of the LT-99BL. While the TeleLock tripod stand is plenty tall on its own, by adding the LTV-24B to the stand, we make it tall enough for all your lighting needs! With the addition of the LTB-48B t-style lighting crossbar and LTB-24B, you have a professional, sturdy lighting tree.
LTB-48B T-style Lighting Crossbar
The LTB-48B is a 48" T-style lighting crossbar that features four pre-drilled holes for mounting your lighting equipment to - we've even included mounting hardware to get you started. It's constructed with thick-walled aluminum so while it's amazingly light, it's rated for use with C-clamps (not included). The LTB-48B also includes two UNF-150 mounting brackets for mounting lighting equipment, such as dimmer packs, to the lighting tree.
LTB-24B Lighting Sidebars
The LTB-24B is a great and flexible way to add more lights to your Ultimate Support lighting tree. It features two 24" sidebars that mount to the LTV-24B Vertical Extension. The two sidebars are height-adjustable, so you can mount them where you need them on the pole for maximum flexibility. Each LTB-28B sidebar features two pre-drilled holes for mounting your lighting equipment to (mounting hardware included).
Over-sized Heavy Wall Aluminum Tubing
The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The LT-99BL will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.
• Base Diameter: 62" (1575 mm)
• Height: 7' 2" to 11' 2" (2184 mm to 3406 mm)
• Weight: 19.6 lbs (8 kg)
• Telescoping Tube Diameter: 1.5" (38 mm)
• Leveling-leg length 40" - 53" (1016 mm - 1346 mm)
• Adapter Diameter: 1.375" (35 mm)
• Load Capacity: 150 lbs. (68.2 kg)