Alesis MULTIMIX6 USB Six-Channel USB Mixer

The MultiMix 6 USB mixer has six input channels, all of which can accept a 1/4" line input. You can can plug XLR microphones into channels one and two, including condensers thanks to the mixer's switchable 48V phantom power supply. You can also plug a guitar or bass directly into channel one's switchable high-impedance input.

Channels one and two offer switchable high-pass filtering at 75Hz to eliminate low-frequency rumble, handling and wind noise. Each channel has a pan control and channels one, two, three, and four provide high and low-shelving EQs. Channels one and two have independent gain trims, while channels three/four and five/six are configured as stereo pairs at the level and pan controls.

The MultiMix 6 USB has a two channel, five stage, multicolor LED meter for visual monitoring the main output level. A stereo, 1/4" headphone output has its own level control.

With flexible inputs for mic, line, and guitar-level sources, and a built-in USB computer recording interface, the MultiMix 6 USB is the compact choice for full-fledged mixing and recording.

FEATURES:•Six-channel mixer with mic, line, and guitar-level inputs
•16-bit, 44.1 kHz stereo USB output on USB for easy Mac and PC interface
•Six 1/4-inch line-level inputs for instruments
•Two XLR inputs with gain trim, switchable high-pass filters, and 48V phantom power
•High-impedance guitar input for direct-connecting guitars
•Two-channel EQ on channels 1, 2, 3, and 4
•Multicolor LED metering for visual level feedback
•Main and headphone outputs with independent level controls
•Class compliant, plug-and-play USB for Mac and PC interface without installing drivers

INCLUDES:

•MultiMix 6 USB mixer

•USB cable

•Power supply

•Quick start guide

SPECIFICATIONS:
Minimum System Requirements:
Mac: OS X
PC: Windows XP, Vista, or 7
USB port


INPUTS: Line (CH 1, 2): 10 KO input impedance
5.5 mV 4.9 V RMS sensitivity for max output
Mic (CH 1, 2): 600 O input impedance balanced
700 mV RMS sensitivity for max output
Line (CH 3, 4, 5, 6): 700 mV RMS sensitivity for max output
HPF (CH 1, 2): 200 Hz (-1 dB), 80 Hz (-3 dB), 20 Hz (-24 dB)

OUTPUTS: Line: 7 V RMS max
Headphone: 0.5 W into 47 O

SIGNAL-TO-NOISE RATIO: Line: > 92 dB
(max output; JIS A-weighted) Mic: > 62 dB

DISTORTION: < 0.02%

FREQUENCY RESPONSE: Line: 20 Hz - 20 kHz ( 0.5 dB), Mic: 20 Hz - 15 kHz ( 0.5 dB)

CHANNEL EQUALIZER: Bass: 14 dB @ 80 Hz, Treble: 14 dB @ 12 kHz

CHANNEL FADER KILL: > 90 dB @ 1 kHz

CROSSTALK: > 85 dB @ 1 kHz

INTERFACE: USB1.1 or higher (stereo in and stereo out)

POWER ADAPTER: 10 V AC, 500 mA

California Prop 65 - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov