for Instant VIP Discounts on most gear! (Better Than Codes, and it's Free)

Crown ITech8000 Power Amplifier

crown i-t8000
Images may show accessories or configurations not packaged with this item.

Be the first to review this product

Unavailable Discontinued or no longer available.
Sorry, this item is discontinued or no longer available from us. We've left this page up for reference only. Check out some of the other great alternatives on this page or click below to see if it can still be found elsewhere.
Buy on Amazon
The Crown I-Tech Series offers amazing power, light weight and ease of use for touring sound applications.

Power Ratings:
20 Hz - 20 kHz Power refers to guaranteed
minimum power in watts with 0.35% THD
* 3500W per channel @ 2 ohm Dual
* 4000W per channel @ 4 ohm Dual
* 2100W per channel @ 8 ohm Dual
* 7000W per channel @ 4 ohm Bridge
* 8000W per channel @ 8 ohm Bridge

Onboard DSP (Digital Signal Processing) provides a wide array of signal processing (compression, limiting, filters,and so on). This greatly reduces the need for rack components and rack wiring. The DSP features 24-bit, 96 kHz A/D and D/A converters. All models in the I-Tech Series are compatible with the IQ Network and TCP/IQ'
networking. CobraNet' input available in optional CN models, coming soon.

* Pushbutton DSP presets simplify the setup. Custom presets can be downloaded into the amplifi er, making it easy to configure for various loudspeaker arrays.
* The Global Power Supply works anywhere in the world, and offers PFC (Power Factor Correction). It is a switching power supply for reduced weight.
I-Tech amplifi ers provide amazing power: up to 8 kW continuous and 10 kW peak in a 2U rack space. They have the highest output voltage in the industry (200V peak), which provides clean transient peaks. The 3rd-generation
patented Class I (BCA) circuitry couples power efficiently to the load and provides low current drain.
* A front-panel control screen shows advanced diagnostics and status information. All controls are set from the front panel. A comprehensive array of indicators provide accurate diagnostics: Power, Data, Bridge, along with Ready, Signal, Clip, Thermal and Fault for each channel. An AC
mains indicator in the power switch glows green when AC power is present.
* Input connectors include analog XLR and digital AES/EBU.
* Analog and digital thru connectors are provided. Output connectors are Speakon and 5-way binding posts

* Minimum Guaranteed Power: See power charts at left.
* Frequency Response (at 1 watt, 20 Hz - 20 kHz): 0.25dB.
Signal to Noise Ratio below rated full-bandwidth power, A-weighted: > 105 dB.
* Total Harmonic Distortion (THD) at full rated power: < 0.35%.
* Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to -35 dB: < 0.35%.
* Damping Factor (20 Hz to 100 Hz at 8 ohms): > 5000.
* Crosstalk (below rated power, 20 Hz to 1 kHz):
> 80 dB.
* Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50dB.
* DC Output Offset (shorted input): < 3 mV.
* Input Impedance (nominal): 20 kilohms balanced,
10 kilohms unbalanced.
* Maximum Input Level: +15 dBu or +21 dBu, depending on input sensitivity
* Latency (analog, digital inputs): 1.13 mS analog, 1.81 mS digital (96 kHz)
A/D, D/A Converters: 24-bit 96 kHz Cirrus Logic.
* Digital Input: AES/EBU, 24-bit, 32-48 kHz.
* Onboard sample-rate converter

Additional Information

Product ConditionNew - On Clearance

Crown ITech8000 Power Amplifier Reviews

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars