for Instant VIP Discounts on most gear! (Better Than Codes, and it's Free)

Crown MT1200 Micro Tech Series Amplifier

This Item Has Been Discontinued
Or Is No Longer Available.

This information only remains here as a reference
for those who need information on this product.

Planet DJ is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to

crown mt-1200
Images may show accessories or configurations not packaged with this item.
Crown's first touring workhorse, the Micro-Tech Series, delivers industry standard performance and reliability.
Micro-Tech 1200: 295 watts into 8 ohms, 425 watts into 4 ohms.
310 watts into 8 ohms
480 watts into 4 ohms
675 watts into 2 ohms.

• 3 separate power supplies
• Output Device Emulation Protection (ODEP)
• Damping factor greater than 1000.
• Balanced XLR and 1/4-inch input connector standard.
• Optional MT-BB Barrier Block accessory
• Grounded Bridge circuitry
• Enable, ODEP indicators
• Dual, Bridge-Mono and Parallel-Mono modes.
• User selectable 3 position input sensitivity switch
• Ground lift switch
• Forced-air cooling.

• Amplifier Accessories: Accepts MT-XLR and MT-BB input modules.
• Signal-to-Noise:(A-weighted) Better than 105 dB below full rated power into 8 ohms with 26 dB gain. (Unweighted) Better than 100 dB below full rated power.
• Input Impedance: Nominally 20 K ohms balanced and 10 K ohms unbalanced.
• Controls: Enable, channel 1 and 2 level controls, stereo/mono switch (Stereo, Bridge-Mono, Parallel-Mono), ground lift switch, three-position input sensitivity switch (0.775 V or 1.4 V for full output or a 26 dB voltage gain).
• Inputs: Balanced 1/4-in. phone jack for each channel.
• Output: A pair of color-coded binding posts for each channel.
• Dimensions: 19 in. (48.3 cm) standard rack mount width, 3.5 in. (8.9 cm) height, 16 in. (40.6 cm) depth behind mounting surface.
• Approximate Weight: Micro-Tech 1200: 41 lbs., 1 oz. (18.7 kg).
• Total Harmonic Distortion (THD): Less than 0.05% at full rated power from 20 Hz to 1 kHz increasing linearly to 0.1% at 20 kHz.
• Intermodulation Distortion (IMD): (60 Hz and 7 kHz 4:1) Less than 0.05% from less than 164 milliwatts to full rated power.
• Load Impedance: Rated for 2 to 8 ohms in Stereo, 4 to 16 ohms in Bridge-Mono, 1 to 4 ohms in Parallel-Mono. Safe with all types of loads.
• FTC Continuous Average Power from 20 Hz to 20 kHz with No More than 0.1% THD: Micro-Tech 1200: 295 watts into 8 ohms, 425 watts into 4 ohms.
• Maximum Average Power at 1 kHz with No More than 0.1% THD: Micro-Tech 1200: 310 watts into 8 ohms, 480 watts into 4 ohms, 675 watts into 2 ohms.
• Maximum Average Power at 1 kHz with No More than 0.1% THD: Micro-Tech 1200: 1,300 watts into 4 ohms.

Additional Information

Product ConditionNew - On Clearance

Write Your Own Review

You're reviewing: Crown MT1200 Micro Tech Series Amplifier

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars