JBL LSR32L Studio Monitor

This Item Has Been Discontinued
Or Is No Longer Available.

This information only remains here as a reference
for those who need information on this product.

Planet DJ is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

jbl lsr32l
The Linear Spatial Reference (LSR) philosophy is based on a set of design goals that carefully control the overall performance of the system in a variety of acoustic spaces.

FEATURES:
• Linear Spatial Reference design based on spatial response measurements and psychoacoustic principles.
• Differential Drive Technology with dynamic braking for extended low frequency response and low power compression.
• Neodymium Midrange with 2" voice coil and KevlarTM cone material for extended frequency response and low distortion.
• Titanium Composite High Frequency Device with Elliptical Oblate Spheroidal Waveguide and Damped Pole Piece.
• Carbon Fiber Composite Baffle for low cabinet resonance and stable inertial ground.
• Linear Dynamics Aperture Port Design eliminates port noise and reduces port compression.
• Input Impedance (nominal): 4 ohm
• Anechoic Sensitivity1: 93 dB/2.83V/1m (90 dB/1W/1m)
• Frequency Response (60 Hz - 22 kHz)2: +1, -1.5
• Low Frequency Extension,2 -3 dB: 54 Hz, -10 dB: 35 Hz
Enclosure resonance frequency: 33 Hz
• Long Term Maximum Power (IEC 265-5): 200 W RMS; 800 W Peak
• Recommended Amplifier Power: 150 W - 1000 W (rating into 4 ohm load)
• HF Frequency Control (2.5 kHz - 20 kHz): 0 dB, -1 dB
• Distortion, 96 dB SPL, 1m3: Low Frequency (below 120 Hz):2nd harmonic: < 1.5%3rd harmonic: < 1 %; Mid & High Frequency (120 Hz - 20 kHz):2nd harmonic < 0.5%3rd harmonic < 0.4%
• Distortion, 102 dB SPL, 1m3: Low Frequency (below 120 Hz):2nd harmonic: < 1.5%3rd harmonic: < 1%; Mid & High Frequency (80 Hz - 20 kHz):2nd harmonic: < 1% 3rd harmonic: < 1 % (N.B: < 0.4%, 250 Hz - 20 kHz)
• Power Non-Linearity (20 Hz - 20 kHz):30 watts < 0.4 dB: 100 watts: < 1.0 dB
• Low - Mid Frequency Crossover: 4th order Acoustic Linkwitz-Riley: 250 Hz Mid - High Frequency Crossover: 4th order Acoustic Linkwitz-Riley: 2.2 kHz
TRANSDUCERS
• Low Frequency Model: 252G
• Diameter: 300 mm (12 in.)
• Voice Coil: 50 mm (2 in.) Differential Drivewith Dynamic Braking Coil
• Magnet Type: Neodymium
• Cone Type: Carbon Fiber Composite
• Impedance: 4 ohm
• Mid Frequency Model: C500G
• Diameter: 125 mm (5 in.)
• Voice Coil: 50 mm (2 in.) Aluminum Edge Wound
• Magnet Type: Neodymium
• Cone Type: KevlarTM Composite
• Impedance: 4 ohm
• High Frequency Model: 053ti
• Diameter: 25 mm (1 in.) diaphragm
• Voice Coil: 25 mm (1 in.)
• Magnet Type: Ceramic 5
• Diaphragm Type: Damped Titanium Composite
• Other Features: Elliptical Oblate Spheroidal Waveguide
• Impedance: 4 ohm
PHYSICAL CHARACTERISTICS
• Finish: Black, Low-Gloss, Sand Texture
• Enclosure Volume (net): 50 liter (1.8 cu. ft.)
• Input Connectors: 5-way binding posts.
• Input Features: Bi-wirable
• Net Weight: 21.3 kg (47 lbs)
• Dimensions (WxHxD): 63.5 x 39.4 x 29.2 cm (25.0 x 15.5 x 11.5 in.)

Additional Information

UPCN/A
SKULSR32L
ManufacturerJBL
Product ConditionNew - On Clearance
ReturnableNo

Write Your Own Review

You're reviewing: JBL LSR32L Studio Monitor

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Quality