The Laserworld CS-1000RGB MKII is a full color RGB laser system with a total output power of up to 1'000mW and a minimum output power of 800mW. The red laser source at 650nm has an output power of >200mW, the green at 532nm of >70mW and the royal-blue laser source at a wavelength of 445nm has an output power of >530mW. The laser sources ensure billiant colors and powerful laser beams. The projector has good beam specifications with a beam diameter of about 3mm and beam divergence of 2.0mrad. The galvo system has a scan speed of up to 30kpps.
Pattern size and the sensitivity of the microphone can be set by two rotary buttons on the rear side of the housing.
Through DMX, in the automatic mode as well as in the sound-to-light mode about 200 preset patterns, like waves, tunnels, circles etc. can be projected in different colors and in various speed. If the automatic mode is active, the pre-programmed patterns run without assistance and in the music mode, the laser system projects according to the sound.
Next to the modi mentioned above, this laser projector provides a master-slave-mode. Show lasers of the same series (slave projectors), connected via DMX to a main projector (master projector) project the same patterns like the master projector.
The Laserworld CS-1000RGB MKII is computer controllable through a professional ILDA interface. Thus own or pre-programmed lasershows, logos, texts or own graphics and animations can be shown in combination with a laser control software.
There are safety features like a key switch, an interlock interface and an on-off switch.
The Laserworld CS-1000RGB MKII is ideal for semi-professional applications and is perfectly suitable in bars, medium sized clubs and discos as well as for rental companies, mobile DJs, private use and in any other party location.Additional Information
Total Power typical: 1.000mW
Minimum output power: 800mW
Power Red: >200mW/650nm
Power Green: >70mW/532nm
Power Blue: >530mW/445nm
Beam Specifications: ca. 3mm/2mrad
Laser Sources: Diode, DPSS Laser
Laser Class: 4
Operation Modes: auto, music, DMX, ILDA
Scanner: galvo system, 30kpps at 4
Scan Angle max.: 40
Basic Patterns: ca. 200 (layers, tunnels, fences, waves, etc.)
Accessories: power cable, manual, interlock connector, key
Power Supply: 85V - 250V AC
Power Consumption: 60 W
Dimensions: 8.7/6.1/5.7 in
Weight: 6.9 lbs
Due to the high power of this laser, a variance is required to be applied for with the FDA (CDRH.) When purchasing, don't forget to add (1) EZVariance Kit
to your order.