The Laserworld CS-2000RGB has a professional ILDA interface. Thus own or pre-programmed lasershows can be shown by use of a laser control software, e.g. of Phoenix or Pangolin. Through DMX about 200 preset patterns, like waves, tunnels, circles etc. can be projected in different colors and in a various speed. The laser system has an automatic mode, which runs the pre-programmed patterns without assistance. If the music mode is active, the laser system projects according to the sound. For the music mode the sensitivity of the mircophone can easily be set on the rear side of the projector. There is a key switch, an interlock interface and an on-off switch at the rear side of the device.
The Laserworld CS-2000RGB is a powerful whitelight laser systems. This device is well suited for professional applications and it is often used in medium to larger sized clubs and discos as well as for the use in any party location.
Total Power typical:2'000mW
Minimum output power:1'500mW
Power Red:>500mW / 650nm
Power Green:>200mW / 532nm
Power Blue:>800mW / 445nm
Beam Specifications:ca. 3mm / 2mrad
Laser Sources:Diode, DPSS Laser
Operation Modes:auto, music, DMX, ILDA
Scanner:galvo system, 30kpps @4
Scan Angle max.:40 max.
Basic Patterns:ca. 200 (layers, tunnels, fences, waves, ect.)
Accessories:power cable, manual, interlock connector, key
Power Supply:110V - 220V AC 50/60Hz
Power Consumption:120 W
Due to the high power of this laser, a variance is required to be applied for with the FDA (CDRH.) When purchasing, don't forget to add (1) EZVariance Kit to your order.
|Product Condition||New - On Clearance|