Get DSP effects built right into the console with the effect-enabled MG12/4FX mixer. You get versatile mixing power, superior audio performance, plus leading Yamaha signal processing quality all in one console.
12 Input Channels:
The MG12/4FX feature a total of 12 input channels: four mono microphone/line inputs and four stereo line inputs, two of which offer mono microphone input capability. Gain trim covers a wide -60dB -16dB range for microphone input, and -34dB +10dB for line input.
A Variety of Input Connectors:
Balanced XLR connectors are provided on all four mono inputs and two of the stereo inputs (a total of six XLR connectors), in addition to phone jack connectors. Two of the stereo channels can accept mono microphone input either via the XLR or phone jack connectors. The remaining two stereo inputs feature both phone jack and pin jack inputs for broad connectivity. A separate stereo 2TR input with pinjack connectors is provided for independent input of signals from CD players or similar sources.
Six Low-noise, High-precision Mic Preamps:
Six high-performance head amplifiers in the 12-channel modes will bring out the best in any dynamic or condenser microphone.
All high-performance mic preamps in these consoles feature switchable phantom power for studio condenser microphones. A single switch turns phantom power on or off for all channels.
Mono input channels feature insert I/O patch points so you can add compressors or EQ for vocals, a noise gate on a guitar channel, or other extra signal processing to individual channels as required.
3-band Channel EQ & HPF (MG12/4FX):
Smooth, "musical-response" 3-band equalizers are provided on the MG12/4FX input channels. All mono microphone input channels also feature a switchable high-pass filter that can be used to cut out unwanted low-frequency noise.
Four Buses (Stereo and Group):
In addition to the main stereo bus, the MG12/4FX feature a stereo group bus and outputs that can be used for convenient channel grouping. Stereo and group bus assign switches are located above each channel fader. You could, for example, mix your instrument sources to the stereo buss while creating separate groups for the main vocal and chorus channels ... or any bus configuration you need for your application.
Total Harmonic Distortion Less than 0.1 % (THD+N)
20 Hz - 20 kHz @ +14 dBu (ST OUT) *3
• Frequency Response -3, 0, +1 dB
20 Hz - 20 kHz @ +4 dBu (ST OUT)
• Input Hum & Noise *1 -128 dBu
• Equivalent Input Noise/-100 dBu Residual Output Noise, 20 Hz
|Product Condition||New - On Clearance|
Yamaha MG12 4FX 12 Input 4 Bus Mixer w/DSP Reviews