The mid-range MG models go beyond the basics to give you extensive control for a wide range of applications - with the no-compromise Yamaha sonic quality that makes the MG mixers the finest in their class.
16 Input Channels:
The MG16/4 feature eight mono microphone/line inputs and four stereo line inputs,
two with mono microphone input capability. Gain trim covers a wide -60dB -16dB range for microphone input, and -34dB +10dB for line input.
A Variety of Input Connectors:
Balanced XLR connectors are provided on all four or eight mono inputs and two of the stereo inputs (a total of six XLR connectors on the MG12/4 models, and ten on the MG16/4), in addition to phone jack connectors. Two of the stereo channels can accept mono microphone input either via the XLR or phone jack connectors. The remaining two stereo inputs feature both phone jack and pin jack inputs for broad connectivity. A separate stereo 2TR input with pinjack connectors is provided for independent input of signals from CD players or similar sources.
Six or Ten Low-noise, High-precision Mic Preamps:
Six high-performance head amplifiers in the 12-channel modes or ten in the 16-channel models will bring out the best in any dynamic or condenser microphone.
All high-performance mic preamps in these consoles feature switchable phantom power for studio condenser microphones. A single switch turns phantom power on or off for all channels.
Mono input channels feature insert I/O patch points so you can add compressors or EQ for vocals, a noise gate on a guitar channel, or other extra signal processing to individual channels as required.
3-band Channel EQ & HPF:
Smooth, "musical-response" 3-band equalizers are provided on all MG12/4 and MG16/4 input channels. All mono microphone input channels also feature a switchable high-pass filter that can be used to cut out unwanted low-frequency noise.
Four Buses (Stereo and Group):
In addition to the main stereo bus, the MG12/4 and MG16/4 feature a stereo group bus and outputs that can be used for convenient channel grouping. Stereo and group bus assign switches are located above each channel fader. You could, for example, mix your instrument sources to the stereo buss while creating separate groups for the main vocal and chorus channels ... or any bus configuration you need for your application.
• Total Harmonic Distortion Less than 0.1 % (THD+N)
20 Hz - 20 kHz @ +14 dBu (ST OUT) *3
• Frequency Response -3, 0, +1 dB
20 Hz - 20 kHz @ +4 dBu (ST OUT)
Input Hum & Noise *1 -128 dBu
• Equivalent Input Noise/-100 dBu Residual • Output Noise, 20 Hz
|Product Condition||New - On Clearance|
Yamaha MG16 4 16 Input 4 Bus Mixer Reviews