Yamaha MSR400 400W 12 Active Speaker

This Item Has Been Discontinued
Or Is No Longer Available.

This information only remains here as a reference
for those who need information on this product.

Planet DJ is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

yamaha msr400
The MSR400 is a bi-amplified 2-way system, featuring 400 watts maximum burst power that drives the 12" cone woofer and 1.75" V.C. compression driver.

Frequency division is accomplished prior to the power amplifiers via a line-level electronic crossover. This eliminates the problems with loss, distortion, and phase that are virtually unavoidable in conventional passive crossover networks. Another advantage of this type of system is that power can be optimally assigned to the low-frequency and high-frequency units for optimum efficiency as well as smooth, natural balance across the entire audio spectrum.

The MSR400 accepts nominal input levels ranging from -36 dB to +4 dB, meaning that you can directly connect any source from microphones to professional line-level gear. Three parallel-connected connectors are provided - two balanced XLR-type connectors and one balanced phone jack - that can be used as either inputs or parallel outputs. The MSR400 also features an input level control for matching with the source signal. Low and high EQ controls can be used to adjust the respective bands over a plus-or-minus 3dB range.

Speaker placement is as much a performance issue as it is a convenience and aesthetic issue. Proper placement will give you optimum sound as well as coverage while being as unobtrusive as possible. Of course, the more options you have the better. The MSR400 can be stacked or pole-mounted (there's even a pole-mount hole provided on the companion MSR800W Powered Woofer). And it's flyable so you can benefit from the unrivalled coverage and positioning precision that only ceiling suspension can provide

TECHNICAL SPECIFICATIONS:
* Crossover Frequency 1.6kHz
* Overall Frequency Response 50Hz-20kHz
* Maximum SPL 121dB (1m)
* Dispersion 90 (H)/40 (V)
* Dimension (W x H x D) 406 x 652 x 351 mm (16" x 25-3/4" x 13-7/8")
* Weight 23kg (50.7lbs)

SPEAKER SECTION
* Components LF: 12" cone
* HF: 1.75" V.C. Compression Driver
* Enclosure
Material Bass-reflex Type PP

AMP SECTION
* Output Power Biamplified system
LF: 225W/ 4O
HF: 75W/16O
* Burst Power: 400W Total
* Input Sensitivity /Impedance MIC/LINE: -36dB/+4dB 10kO
* Input/Output Connectors:
(all parallel) 1: XLR-3-31 balanced
2: XLR-3-32 balanced
3: PHONE balanced
* Controls LEVEL CONTROL, EQ. LOW: (+/- 3dB at 55Hz),
* HIGH: (+/- 3dB at HF), POWER Switch (ON/OFF)
* Indicators Power ON: Green LED
Clipping: Red LED
* Power Requirment U/C: AC120V 60Hz
* Power Consumption 110W

Additional Information

UPCN/A
SKUMSR400
ManufacturerYamaha
Product ConditionNew - On Clearance
ReturnableNo

Write Your Own Review

You're reviewing: Yamaha MSR400 400W 12 Active Speaker

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Quality