ElectroVoice CPS 2.12 MKII Class-H Power Amplifier

Features
• Up to 2 x 2400 W into 2 ohms
• Phoenix-type input and output connections
• Remote power-on/off contact
• Rear-mounted attenuators
• Programmable time for custom power-on delay settings
• Module slot for optional RCM-810 card, allowing IRIS-Nett control and monitoring
• Switchable 50 Hz high-pass filter
• Three-stage front-to-rear fans
• Class-H design
• Complete protection package

EV CPS 2.12 MKII Specifications
• Amplifier Gain:32 dB
• Analog Inputs: 2, electronically balanced, Phoenix-type
• Audio Network: No
• CAN Bus Interface: Optional (RCM-810 card)
• Continuous Rated Power (1 kHz, THD 1%) 2 Ohms: 1800 Watts
• Continuous Rated Power (1 kHz, THD 1%) 4 Ohms: 1200 Watts
• Continuous Rated Power (1 kHz, THD 1%) 8 Ohms: 750 Watts
• Continuous Rated Power (20-20 kHz, THD<0,2%) 4 Ohms: 1100 Watts
• Continuous Rated Power (20-20 kHz, THD<0,2%) 8 Ohms: 550 Watts
• Cooling: Front-to-Rear, 3-stage-fans
• Crossover Type: Modular
• DIM 30: 0.05 %
• Electronics Type: Amplifier
• Frequency Response: 10 Hz - 40 kHz 1 dB
• Impedance: 2/4/8 Ohms
• Input Impedance (Balanced): 20 kOhms
• Input Sensitivity: +6.6 dBu (1.66 Vrms)
• Intermodulation Distortion (SMPTE): 0.1 %
• Mains Voltage: 240 V, 230 V, 120 V or 100 V; 50 Hz - 60 Hz (factory configured)
• Maximum Bridged Output 4 Ohms: 3600 Watts
• Maximum Bridged Output 8 Ohms: 2400 Watts
• Maximum Input Voltage: +21 dBu (8.69 Vrms)
• Network Control (IRIS-Net): Optional (RCM-810 card)
• Slew Rate: 30 V/s
• Topology: Class-H
• Total Harmonic Distortion: 0.03 %
• Variable Load Drive (VLD): No
• Height: 2RU 3.47" (88.1 mm)
• Width: 19" (482.6 mm)
• Depth: 16.59" (421.5 mm)
• Weight Net: 17.7 kg (39.02 lbs)

California Prop 65 - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov