The HTU2 handheld transmitter is a rugged, high-impact, ABS plastic handheld. The smart battery feature makes the HTU2 easy to use, and easy to maintain.
DESIGNED FOR: • House of Worship
• Performance & Sports Venues
• Stadium Systems
• Other Applications
VIDEO
The Electro-Voice RE-2 is a completely programmable, frequency-agile wireless system with one-touch Auto-ClearScan, Posi-phase' diversity, and advanced audio circuits for the best possible sound. Operating over 28MHz (six TV channels), it includes XLR mic/line level output, backlit LCD display, and a unique mode that is optimized for guitar.
FEATURES RE-2 Receiver • One-touch Auto-ClearScan
• Programmable in 25kHz steps across 28 MHz operating bandwidth
• Backlit LCD displays the Group, Channel, Frequency, transmitter battery level, diversity operation, RF, and Audio signal level meters
• Balanced XLR audio output for Microphone or Line level signals and a 1/4-inch line level jack
• Fourth-generation Posi-phase diversity and advanced audio circuits
• Unique "Guitar" setting
• Detachable 1/4 wave antennas
RE-2 UHF Transmitter • Unique "smart" battery
• LCD Displays Group and Channel, Frequency, or Battery Level
• Low battery LED
• One On/Off button that also acts as a mute
• On/Off button can be disabled
RE-2 UHF Handheld • NDYM 767a Dynamic premium vocal microphone with VOBTM(Vocal-Optimized-Bass)
• Internal 1/2-wave antenna
SPECIFICATIONS RE-2 Receiver Receiver Type: Synthesized PLL
Frequency Range (RF): A Band 648 - 676 MHz (TV Channels 43 - 48)
Number of Channels: >1122 possible frequencies, programmable in 25 kHz steps
Modulation: +/- 40 kHz
Diversity: Digital Posi-Phase True Diversity
RF Sensitivity: <1.0 _V for 12 dB SINAD
Image Rejection: >60 dB
Squelch:Tone Code plus Amplitude
Ultimate Quieting: >100 dB
FCC Certification: Approved under Part 15
Power Requirements: 12-15V AC/DC, 300mA
Antennas Detachable: 1/4 wave
Receiver Dimensions: 1.72 in. H x 7.50 in. W x 5.9 in., D 43.69 mm H x 190.50 mm W x 150 mm D
Audio Parameters
Frequency Response: 50-15 kHz +/- 2dB
Balanced Output (typical): (max @ 40 kHz deviation) 330mV RMS 100K OHM Load, Mic Position, 10mV to 2V RMS 100K OHM Load, Line Position
Unbalanced Output: adjustable 10 mV to 1V RMS, 100K OHM Load
Distortion: <1.0%, 0.5% typical (ref 1kHz, 40kHz deviation)
Signal-to-Noise Ratio: >100 dB A Weighted
Dynamic Range: >100 dB
Transmitter: HTU-2
Radiated Output: 30 mW Typical
Microphone Head: N/D 767a supercardioid N/DYM dynamic
TA4F Connector Wiring: Pin 1: Ground; Pin 2 Mic Input;
Pin 3: +5V bias; Pin 4: +5V bias through a 3k
Audio Gain Adjustment Range: 40 dB BPU-2
26 dB HTU-2
Power Requirements: 9 Volt Alkaline Battery
Battery Life (Typical): >8 hours with 9-Volt Alkaline Typical
Handheld Antenna: Internal 1/2 wave
Dimensions (Handheld): 24.0 cm (9.4 in.) Long
Transmitter
Radiated Output Normal 5 mW typical, High 50 mW typical
Microphone Head: 767a Supercardioid N/DYM Dynamic
Handheld Antenna: Internal 1/2 wave
Dimensions (Handheld): 26.8 cm (10.5 in.) Long
Consumer Alert: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC's wireless microphone website at:
www.fcc.gov/cgb/wirelessmicrophones .
California Prop 65 -
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov