Laserworld EL-200RGB Ecoline Laser

Dropships Ships Directly From The Supplier
Laserworld can usually ship this item directly to our U.S. customers after 1 to 3 business days processing time, depending upon their stock levels. Order now! We'll notify you promptly if we hear of any delay.
Free Shipping FREE Ground Shipping to the contiguous U.S. (details)
$399.99
Affirm Financing
Future Pay
X
    • BONUS! Buy Now and Earn 799 PDJ Bucks ($7.99)! MUST Be Logged In! Domestic U.S. customers only. Exact value may vary once logged in.

You Might Also Like

The Laserworld EL-200RGB is a RGB laser system with a total output power of up to 200mW. The red diode laser module with a wavelength of 650nm, the green DPSS laser module with a wavelength of 532nm and the royal-blue laser module with a wavelenght of 445nm ensure beautiful colors and brightness. The beams have a diameter of about 3mm and a beam divergence of about 2mrad and the projector offers high-speed stepper motors with 2-5kpps as well as a scan angle of up to 30.

About 50 preset basic patterns, like layers, tunnels, fences, waves etc. can be controlled via DMX. A sound-to-light mode as well as a stand-alone mode are available too. For the sound-to-light mode the sensitivity of the integrated adjustable microphone can be adjusted.There is an on-off switch at the rear side of this device.The triple laser apertureprovides extra intense red, green and blue beam effects.



The Laserworld EL-200RGB is a good solution for fist-time users and mobile use and it is often used in bars, small clubs, at private parties or for home use.

Total Power typical: 200mW
Minimum output power: 145mW
Power Red: >60mW / 650nm
Power Green: >25mW / 532nm
Power Blue: >60mW / 445nm
Beam Specifications: ca. 3mm / 2mrad
Laser Sources: Diode, DPSS Laser
Laser Class: 3b
Operation Modes: Stand-Alone, Sound-to-Light, DMX
Scanner: high-speed stepper motors, up to 2-5kpps
Scan Angle max.: 30
Basic Patterns: ca. 50 (layers, tunnels, fences, waves, etc.)
Accessories: power cable, manual
Power Supply: 110V - 220V AC 50/60Hz
Power Consumption: 60 W
Dimensions: 6.9/15.6/3.4 in
Weight: 8.6 lbs

Consumer Alert!
Due to the high power of this laser, a variance is required to be applied for with the FDA (CDRH.) When purchasing, don't forget to add (1) Variance Kit to your order.

Additional Information

UPC7640144991326
SKUEL200RGB
ManufacturerLaserworld
Product ConditionNew
ReturnableYes

Write Your Own Review

You're reviewing: Laserworld EL-200RGB Ecoline Laser

How do you rate this product? *

 1 star2 stars3 stars4 stars5 stars
Quality