About 50 preset basic patterns, like layers, tunnels, fences, waves etc. can be controlled via DMX. A sound-to-light mode as well as a stand-alone mode are available too. For the sound-to-light mode the sensitivity of the integrated adjustable microphone can be altered.There is an on-off switch and a controller for projection size settings at the rear side of this device.
The Laserworld ES-400RGB is a innovative solution for fist-time and hobby users, as well as for mobile DJs and it is often used in bars, small to medium sized clubs, at private parties or for home use.
Total Power typical: 400mW
Minimum output power: 300mW
Power Red: >100mW / 650nm
Power Green: >50mW / 532nm
Power Blue: >150mW / 445nm
Beam Specifications: ca. 3mm / 2mrad
Laser Sources: Diode, DPSS Laser
Laser Class: 3b
Operation Modes: auto, music, DMX
Scanner: Galvo System 30kpps@4
Scan Angle max.: 30 max.
Basic Patterns: ca. 50 (layers, tunnels, fences, waves, etc.)
Accessories: power cable, manual
Power Supply: 110V - 220V AC 50/60Hz
Power Consumption: 30 W
Dimensions: 9.3/10.1/4 in
Weight: 8.6 lbs
Due to the high power of this laser, a variance is required to be applied for with the FDA (CDRH.) When purchasing, don't forget to add (1) Variance Kit to your order.