The Laserworld CS-1000RGB is a RGB laser system with a total output power of up to 1,000mW. The red diode laser modules with a wavelength of 650nm, the green DPSS laser module with a wavelength of 532nm and the royal-blue diode laser module with a wavelength of 445nm ensure brilliant colors and powerful laser beams. The projector has good beam specifications with a beam diameter of about 3mm and beam divergence of 2.0mrad. At the same time it offers a galvo system with up to 30kpps as well as a scan angle of up to 40.
The Laserworld CS-1000RGB has a professional ILDA interface. Thus own or pre-programmed lasershows can be shown by use of a laser control software, e.g. of Phoenix or Pangolin. Through DMX about 200 preset patterns, like waves, tunnels, circles etc. can be projected in different colors and in a various speed. The laser system has an automatic mode, which runs the pre-programmed patterns without assistance. If the music mode is active, the laser system projects according to the sound. For the music mode the sensitivity of the mircophone can easily be set on the rear side of the projector. There is a key switch, an interlock interface and an on-off switch at the rear side of the device.
The Laserworld CS-1000RGB is one of the most popular laser systems of the Club Series. It is well suited for professional applications and it is often used in bars, medium sized clubs and discos as well as for the use in any party location. Additional Information
Total Power typical: 1'000mW
Minimum output power: 750mW
Power Red: >250mW / 650nm
Power Green: >50mW / 532nm
Power Blue: >450mW / 445nm
Beam Specifications: ca. 3mm / 2mrad
Laser Sources: Diode, DPSS Laser
Laser Class: 4
Operation Modes: auto, music, DMX, ILDA
Scanner: galvo system, 30kpps at 4
Scan Angle max.: 40 max.
Basic Patterns: ca. 200 (layers, tunnels, fences, waves, etc.)
Accessories: power cable, manual, interlock connector, key
Power Supply: 110V - 220V AC 50/60Hz
Power Consumption: 60 W
Dimensions: 12.5/13.2/4.4 in
Weight: 13.5 lbs
Due to the high power of this laser, a variance is required to be applied for with the FDA (CDRH.) When purchasing, don't forget to add (1) EZVariance Kit
to your order.