The Laserworld EL-200RGB is a RGB laser system with a total output power of up to 200mW. The red diode laser module with a wavelength of 650nm, the green DPSS laser module with a wavelength of 532nm and the royal-blue laser module with a wavelenght of 445nm ensure beautiful colors and brightness. The beams have a diameter of about 3mm and a beam divergence of about 2mrad and the projector offers high-speed stepper motors with 2-5kpps as well as a scan angle of up to 30.
About 50 preset basic patterns, like layers, tunnels, fences, waves etc. can be controlled via DMX. A sound-to-light mode as well as a stand-alone mode are available too. For the sound-to-light mode the sensitivity of the integrated adjustable microphone can be adjusted.There is an on-off switch at the rear side of this device.The triple laser apertureprovides extra intense red, green and blue beam effects.
The Laserworld EL-200RGB is a good solution for fist-time users and mobile use and it is often used in bars, small clubs, at private parties or for home use.
Total Power typical: 200mW
Minimum output power: 145mW
Power Red: >60mW / 650nm
Power Green: >25mW / 532nm
Power Blue: >60mW / 445nm
Beam Specifications: ca. 3mm / 2mrad
Laser Sources: Diode, DPSS Laser
Laser Class: 3b
Operation Modes: Stand-Alone, Sound-to-Light, DMX
Scanner: high-speed stepper motors, up to 2-5kpps
Scan Angle max.: 30
Basic Patterns: ca. 50 (layers, tunnels, fences, waves, etc.)
Accessories: power cable, manual
Power Supply: 110V - 220V AC 50/60Hz
Power Consumption: 60 W
Dimensions: 6.9/15.6/3.4 in
Weight: 8.6 lbs
Due to the high power of this laser, a variance is required to be applied for with the FDA (CDRH.) When purchasing, don't forget to add (1) EZVariance Kit
to your order.