Laserworld PM-1200RGB Pure Diode Micro Laser

The RGB module used for the Pure Micro projectors are Swiss Made and have the special beam shaping and collimation of Swisslas to ensure great beam precision. No matter if graphics projections, beam shows or professional advertising - the Pure Micro units work on highest professional level.

The complete projector is built with Sealed Housing Technology and is cooled through the external cooling fins (bottom part).

The very small housing (7.3/6.5/5.0 in) and the very low weight makes this unit very versatile: Just carry several Pure Micro units in your hand luggage to your laser shows all around the world! Of course the Pure Micro units respect the very latest safety regulations according to IEC-60825 - and even beyond those: The Xscan come standard with Advanced Scan Fail Safety.

The projector has good beam specifications with a beam diameter of about 3mm and beam divergence of about 0.8mrad. There is a guaranteed total power of 1'000mW and a typical output power of 1'200mW.

Total Power typical: 1'200mW
Guaranteed power at aperture: 1'000mW
Power Red: >170mW / 638nm
Power Green: >150mW / 520nm
Power Blue: >730mW / 450nm
Beam Specifications (full angle): ca. 3mm / 0.8mrad
Laser Sources: Diode
Laser Class: 4
Operation Modes: ILDA; optional DMX, LAN, SD-card
Scanner: Xscan Galvo System, 35kpps@8 ILDA; as upgrade available CT-6210HP, >50kpps@8 ILDA
Scan Angle max.: 60 max.
Accessories: External PSU, Allen key, power cable, manual
Power Supply: 100-220V AC 50/60Hz through external 24V DC >4A
Power Consumption: 90 W
Dimensions: 7.3/6.5/5.0 in
Weight: 9.1 lbs

California Prop 65 - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov